These industrial strength ultrasonic baths are designed for demanding applications and suitable for continuous operation. The baths are also ideal for cleaning delicate or fragile components which may otherwise be damaged by mechanical cleaning.
The new models feature a function which allows frequently used parameters to be stored in memory. This guarantees the exact repetition of a cleaning or degassing process and is useful in quality control procedures.
The baths are available from 1 to 90 litres capacity and feature an automatic sweep function for an efficient cleaning system and optimised performance. User-selectable option of boost and degas.
The touch pad, wipe clean, LED control panel displays set and actual values and temperature can be set between 30°C and 80°C in 5°C increments. The timer can be selected to operate between 1-30 minutes or maximum of up to 8 hours with auto switch-off after 12 hours on the larger models, if no keys have been activated, this feature prevents unintended operation.
Can be operated with or without tank temperature control.
Features lifting handles.
Please note – This ultrasonic cleaning unit has been designed for the ultrasonic treatment of items and liquids only. No alcohol or flammable related items can be used as this is very dangerous.
Safety Features
Heating elements are controlled electronically to reduce energy demand and prevent overheating if allowed to run dry. Bath is fitted with non-slip feet.
Ultrasonic information and applications
This range is designed for intermittent and ‘permanent on’ use. Do not allow items to touch base of the tank, so an accessory basket is recommend. To achieve consistent heating, minimise evaporation and act as a dust cover, preventing contamination the bath should be covered with a lid.
For the cleaning of glassware and complicated instruments.
Removal of chemical residues, coking and soot, baked residues of chemical reactions, microbiological residues. With these ultrasonic baths instruments will be clean without any residue.
The degas function quickly de-gasses the liquid without accumulation of bubbles. Samples and HPLC solvents must be free of gas bubbles for analysis.
For increased ultrasonic power, the “Boost” function allows an increase in ultrasonic performance. Permanent operation possible for tenacious contamination.
Features and Benefits
1. High power piezoelectric transducers ensure maximum ultrasonic power throughout working area.
2. Illuminated on/off mains switch.
3. Full use can be made of the bath to provide maximum working area.
4. Totally unobstructed, stainless steel tank.
5. Concealed heater and temperature sensors.
6. Bench top footprint.
7. Fitted with non-slip rubber feet for safety.
8. A 304 spec stainless steel tank gives good resistance to many substances and a clean appearance throughout its working life.
9. Sturdy stainless steel housing.
10. Built to latest safety standards and supplied with comprehensive operating instructions and three-year warranty.
11. A range of accessories available.
12. Easy to clean tank.
13. Each bath is uniquely identified with its own serial number recorded on our product database. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
Dimensions:
– External: 300w x 190d x 220h mm
– Internal: 235w x 135d x 100h mm
Temperature Range: 30°C to 80°C in 5°C increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Voltage: 120V or 230V 50-60Hz
Ultrasonic Effective Power: 80W
Ultrasonic peak power: 320W
Ultrasonic operating frequency: 37kHz
Heater Power (220-240V): 200W
Warranty Period: 3 Years
