Clifton Drying Ovens feature intuitive easy to use controls with a bold illuminated LED display, offering precise temperature control from ambient +5°C to 300°C with timer functions.
These Ovens can run at set temperature immediately, use run back timer or enable a delay start feature. Can be configured for gravity convection or with variable fan speed providing forced air circulation within the chamber.
The Oven chamber is constructed from high quality stainless steel, lagged with high efficiency thermal insulation, all contained within an outer steel housing with anti-bacterial paint finish.
With energy efficiency in mind, particular attention is paid to robust design, insulation, a tight door closure with silicone seal and hinge design to maintain chamber temperatures with intelligent temperature control.
Controls
Featuring bold illuminated LED display of measured temperatures in real-time, in increments of ±0.1°C with intuitive to use controls, utilising touch sensitive keypads. Indicators for heating, timers and alarm.
On/off power switch.
Exhaust air flap is dial adjustable from 0 to 100% for chamber venting.
Fan chamber convection variable from 0% to 100%. Fan convection improves temperature uniformity and heating recovery time.
Door, lockable with 2 point door engagement for an even seal.
On left hand side the Oven features a 35mm diameter Access port, with perforated flap cover, to reduce heat losses when used with external probes.
Safety Features
Switching on, the controls undergo an automatic diagnostic check.
Features a temperature sensor fail alarm with error reporting on LED screen.
Over temperature alarm is automatically set 5°C above set point.
Door open heating is interrupted, after a short delay a door sounder chimes until door closed, heating resumes.
Fitted with Class 1 over temperature thermostat for overall unit protection.
Safety Class
Fitted with Class 1 over temperature thermostat for overall unit protection.
Dimensions:
– External: 600w x 605d x 720h mm
– Internal: 400w x 400d x 360h mm
– Packed: 75x73x90cm
Capacity: 56 litre chamber
Temperature Range: ambient +5°C to 300°C
Temperature Alarm: Over temperature alarm is automatically set 5°C above set point
Temperature Control: PID Digital, LED display showing actual or set temperature, resolution 0.1°C
Temperature Sensor: pt100 with control diagnostics at power up
Temperature Fluctuation: ±0.4°C @ 150°C
Temperature Variation: ±1.8°C @ 150°C
Temperature Control & Run Back Timer: Visual indicator and end messaging 00:01 to 99:59 (hh:mm) activates at set temp.
Temperature Control & Delay Start Timer: Heating commences at a set time in the future, within 24 hours
Chamber convection: Fan speed can be set from 0% gravity convection within the chamber variable to 100% for forced air convection.
Exhaust air flap: Adjustable 0 to 100% chamber venting
Access Port: 35mm port size, perforated flap cover helps to reduce losses when fitting independent external probes or thermocouples.
Door configuration: Single insulated door, lockable with 2 point door engagement for an even seal
Door Alarm: Door open, heating interrupted, delay before door sounder chimes until door closed, heating resumes
Shelves fitted & maximum: 2 wire / 5 max stainless steel
Shelving Locations: Available every 20mm vertically
Shelf Maximum Load: 20kg
Heater Power: 2150W
Voltage: 230V 50/60Hz
Stackable: Yes
Feet/Castors: Levelling Feet
Packed Weight: 61 kg
Warranty: 2 Years
